Jump to: navigation, search

Difference between revisions of "External Power"

(Connector Components)
Line 14: Line 14:
 
==Power Connector==
 
==Power Connector==
  
{{External Power Port Intro}}
+
{{Power Connector}}
 
+
===Connector Components===
+
{{Power Connector BOM}}
+
 
+
 
+
{{pdf|Power_Connector_Pin_Map}}
+
  
 
==External Power Tether==
 
==External Power Tether==

Revision as of 15:28, 9 December 2013

Contents

The power management system can utilize two separate 24V power inputs: One input for the motor controllers/motors and one input for everything else. This isolation, and the ability to use of separate power supplies, allows the motor power to be disabled while leaving the internal computer and every other component running unaffected. This also provides the user the option to use a power supply capable of supplying higher currents for the motor power while using a smaller one to power the computer, etc.

  1. The 24VDC line for the motor controllers and motors requires the use of eight (8) connector pins (4 positive, 4 negative). Multiple pins are used for each pole to handle the current necessary to run the dog under extreme conditions.
  2. The other 24VDC line powers the power management system, computer, and other accessories including sensors. This line requires only two (2) pins within the connector (1 positive, 1 negative).


Note When power is supplied to the power management system it will automatically turn on without any further action from the user. It is only powered off when the power supply is removed. Powering the internal computer and motor controllers requires further action.


See below the Allegro Dog's power connector pin map and wiring diagram for using a tethered power supply.


Power Connector

(No. 1 on the Control-I/O Panels)

The external power port is used to supply external power or redirect battery power to the Allegro Dog. It accepts two separate 24V inputs: One input powers the power management system and the second powers the motor controllers and motors.


Connector Components

Connector Body
Cannon Trident TR1619RFS1NB (female)
Cannon Trident TR1619PMS1NB (male)
Contact Pins
Cannon Trident T3P16FS1LT (female)
Cannon Trident T3P16MS1LT (male)


Power_Connector_Pin_Map.pdf

External Power Tether

External_Power_Connector_Pin_Map.pdf
External_Power_Dual_Supplies.pdf
Power Source Wire Routing External.pdf


Recommended Power Supply

The Allegro Dog power supply used by SimLab in house is the 40V, 70A Sorensen XFR 40-70.


Sorensen XFR 40-70 Datasheet.pdf