Jump to: navigation, search

Template:Back Panel

Revision as of 17:52, 12 November 2013 by Alexalspach (Talk | contribs)

500px

1. External Power Port:

1. External Power Port
This port is used to supply External Power or Battery Power to the Allegro Dog. It accepts two separate 24V inputs: One input powers the Power Management System and the second powers the Motor Controllers and Motors.
{{{2}}} When power is supplied to the power management system it will automatically turn on without any further action from the user. It is only powered off when the power supply is removed.
2. Main Power Switch
This switch controls the supply of power to then entire Allegro Dog system. To use the internal computer, motors or 24V/B, 12V or 5V internal power sources, this switch must be switch to 'on'.
{{{2}}} Upon flipping this switch, the 24V/B, 12V and 5V internal power sources will become active. The Internal Computer, as well as the motor controllers and motors will remain unpowered until manually powered on by the user.
{{{2}}} Turning this switch off will kill power to the entire dog no matter the status. Both the computer and motors / motor controllers, as well as any other device powered by the power management system, will lose power immediately.