Serial Number: SAH020CR017 (Right, v2.0) Revision as of 16:08, 19 September 2016 by Admin
- Allegro Application Studio (Installation)
- Allegro Application Studio (User Manual)
- Programming Guides
- Mounting Information
- CAN Protocol
More information is accessible using the navigation bar at the top of the page.
RoboticsLab for Allegro Hand
See the Allegro Hand RoboticsLab Project for source code and instructions.
Allegro Application Studio
Note: Please see the DMLs section below before uninstalling your current version of AHAS.
This version should address graphics related issues.
Make sure to copy your current DMLs and fully uninstall AHAS before installing this new version.
DML files used in Allegro Hand Application Studio (AHAS) contain joint offsets and directions and are specific to each hand.
Please locate the DML files in your current AHAS installation and copy them to a safe place before uninstalling. After installing the new AHAS version, you will need to copy your original DML files to the newly installed AHAS.
DML files can be found here:
C:\Program Files\SimLab\Allegro Hand Application Studio\bin\models\Etc\ERHand\devices
Offsets and Directions
Note: These are the offsets and directions for your Allegro Hand
Copyright & Trademark Notice
Allegro, the Allegro logo, RoboticsLab, the RoboticsLab logo, and all related files and documentation are Copyright ⓒ 2008-2020 Wonik Robotics Co., Ltd. All rights reserved. RoboticsLab and Allegro are trademarks of Wonik Robotics. All other trademarks or registered trademarks mentioned are the properties of their respective owners.
Wonik Robotics's Allegro Hand is based on licensed technology developed by the Humanoid Robot Hand research group at the Korea Institute of Industrial Technology (KITECH).
Any references to the BHand Library or the Allegro Hand Motion and/or Grasping Library refer to a library of humanoid robotic hand grasping algorithms and motions developed and published by KITECH researchers.
J.-H. Bae, S.-W. Park, D. Kim, M.-H. Baeg, and S.-R. Oh, "A Grasp Strategy with the Geometric Centroid of a Groped Object Shape Derived from Contact Spots," Proc. of the 2012 IEEE Int. Conf. on Robotics and Automation (ICRA2012), pp. 3798-3804
Wiki maintained by Sean Yi <firstname.lastname@example.org>
|Whos here now: Members 0 Guests 1 Bots & Crawlers 0|