Difference between revisions of "Mounting Information"
Alexalspach (Talk | contribs) (→Mount Block Removal) |
Alexalspach (Talk | contribs) m (→Mount Block Removal) |
||
| Line 11: | Line 11: | ||
Remove six (6) screws on either side of the hand.<br> | Remove six (6) screws on either side of the hand.<br> | ||
Do '''NOT''' remove the two (2) screws labeled ''A'' or the corresponding screws on the other side of the hand. <br> | Do '''NOT''' remove the two (2) screws labeled ''A'' or the corresponding screws on the other side of the hand. <br> | ||
| + | <br> | ||
'''''Note:''' Secure the hand while unscrewing the mounting block to avoid dropping the hand once disconnected.'' <br> | '''''Note:''' Secure the hand while unscrewing the mounting block to avoid dropping the hand once disconnected.'' <br> | ||
<br> | <br> | ||
Revision as of 14:29, 19 October 2012
All dimensions are displayed in millimeters (mm) and degrees.
Please click on any image for a larger version.
Contents |
Mount Block Removal
The mounting block is connected to the Allegro Hand using twelve (12) M3 screws (6 on each side)
Remove six (6) screws on either side of the hand.
Do NOT remove the two (2) screws labeled A or the corresponding screws on the other side of the hand.
Note: Secure the hand while unscrewing the mounting block to avoid dropping the hand once disconnected.
Once the twelve (12) screws have been removed, the mounting block can be removed from the bottom of the hand.
Mounting
Reassembly
Mount Block Dimensions
| Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |