Allegro Hand Application Studio (Installation) Revision as of 13:53, 5 October 2012 by Alexalspach (Talk | contribs)
Allegro Application Studio (AAS) for the Allegro Hand comes as a packages installer for easy installation. This setup tutorial will guide you through the steps necessary to get your Allegro Hand up and running for the first time.
Contents |
AAS Installation
blah blah blah choose installation directory
if you have robotics lab you can choose RoboticsLab as the install directory
CAN Installation
Your CAN interface, either PCI (Softing, ESD, Kvaser) or USB (NI), should be installed or plugged in to you computer before installing the proper drivers.
CAN Hardware drivers, if not included with the hardware, can be downloaded from the respective manufacturer's website. For the four CAN interfaces available through SimLab, product drivers and documentation are available at the following websites.
Note: Check in Start Menu > Control Panel > Device Manager to make sure that a driver has installed successfully.
NI USB-8473s CAN
- NI Product Website
- USB-8473s Data Sheet:
- USB-8473s Software Manual:
Driver
NI-CAN 2.7.4 (Windows 7)
Softing CAN-AC2-PCI
- Softing Product Page
- CAN-AC2-PCI Data Sheet:
- CAN-ACx-PCI Hardware Notes:
Driver
Softing CAN Drivers (Windows 7)
- Click "Downloads"
Kvaser PCIcan 4xHS
- Kvaser Product Page
- PCIcan 4xHS Data Sheet:
- PCIcan 4xHS Hardware Reference Manual:
Driver
Kavaser CAN Drivers
- Click "Downloads"
ESD CAN-PCI/266
- ESD Product Page
- CAN-PCI/266 Data Sheet:
- CAN-PCI/266 Hardware Installation and Technical Data:
Driver
ESD CAN Driver
Running AAS
shortcut installed on desktop??
exe in install directory??
Copyright & Trademark Notice
Allegro, the Allegro logo, RoboticsLab, the RoboticsLab logo, and all related files and documentation are Copyright ⓒ 2008-2020 Wonik Robotics Co., Ltd. All rights reserved. RoboticsLab and Allegro are trademarks of Wonik Robotics. All other trademarks or registered trademarks mentioned are the properties of their respective owners.
Wonik Robotics's Allegro Hand is based on licensed technology developed by the Humanoid Robot Hand research group at the Korea Institute of Industrial Technology (KITECH).
Any references to the BHand Library or the Allegro Hand Motion and/or Grasping Library refer to a library of humanoid robotic hand grasping algorithms and motions developed and published by KITECH researchers.
J.-H. Bae, S.-W. Park, D. Kim, M.-H. Baeg, and S.-R. Oh, "A Grasp Strategy with the Geometric Centroid of a Groped Object Shape Derived from Contact Spots," Proc. of the 2012 IEEE Int. Conf. on Robotics and Automation (ICRA2012), pp. 3798-3804
Wiki maintained by Sean Yi <seanyi@wonikrobotics.com>
| Whos here now: Members 0 Guests 2 Bots & Crawlers 1 |