| 4:24:35 AM - Fri, Aug 12th 2022 |
|
Clear Glass Tile is certainly one of the most used tiles among homeowners and interior designers who are working on a home backsplash, bathroom or swimming pool project. Because clear glass tiles are translucent - you will see through, they have a shiny and rich look that opens unlimited possibilities in terms of design.
Although the meaning of clear/translucent glass is "allowing light to pass through partially or diffusely", it doesn't show that all clear glass tiles are transparent in a way that you will see, as an example, an item or your hand behind it. Clear glass could be the material used to produce these tiles, but they could have color or not.
Back colored clear glass mosaic tiles are by far the most used in the market. The tiles are constructed with clear/translucent glass usually from 4mm to 8mm thick, and they receive a coating/painting on the back during manufacturing, which will be what gives the color to the tile. Usually they are available mesh attached to a fiberglass sheet or as field tiles such as for example subwayÂ
Stained clear glass tiles are constructed with clear/translucent glass which are stained during its manufacturing process and then cut into multiple pieces. In this instance, you will see entirely through it even if it includes a dark stain color, and that's the main reason they are not mesh-backed glasses clear frames, otherwise you would see the mesh through the glass despite installed. Instead, they are attached to clear-faced or paper-faced sheet.
Plain or non-colored clear glass tiles are constructed with clear/translucent glass and do not have color in it. Although the word "plain" is employed to explain these kinds of tiles, they are extremely elegant and easy to work with if you want to offer a special "touch" to a home backsplash, bathroom, and shower or swimming pool. Simply because they don't have any color inside it and are totally transparent, they match any color from granite countertops to kitchen cabinets and easily blend in to the environment.
Stained and Plain Clear Glass Tiles require more attention when installing. Because you will see what is on the other side of the tile, you might wind up seeing the path created by the trowel once the installer was butting the wall. Therefore it is recommended to use a white adhesive such as for example mastic and also butter the back of the tiles. Be sure to press the tiles firmly against the wall with a grout float and have a look if you have any air bubbles after each and every piece has been placed so you might correct the issue before the adhesive dries. Definitely this sort of glass tiles takes additional time to put in but the result is totally worth.
|
