Weiss:Allegro Hand Revision as of 14:19, 14 November 2013 by Alexalspach (Talk | contribs)
Contents |
Getting Started
- Allegro Application Studio (Installation)
- Allegro Application Studio (User Manual)
- Programming Guides
- Mounting Information
- CAN Protocol
More information is accessible using the navigation bar at the top of the page.
RoboticsLab for Allegro Hand
See the Allegro Hand RoboticsLab Project for source code and instructions.
Allegro Hand Application Studio (AHAS)
Note: Please see the DMLs section below before installing AHAS.
Below you can download your copy of Allegro Application Studio for your Allegro Hand.
Please refer to Allegro Application Studio (Installation) for installation instructions.
DMLs
After installing, you must copy your hand-specific DML (device description) files to the proper directory of your AHAS installation. These files include motor directions and encoder offsets.
In the installation disk's root directory, locate the folder titled 'devices_SAH020*****'. Copy every file in this folder and replace the corresponding files in the AHAS devices directory.
DML files can be found here:
C:\Program Files\SimLab\Allegro Hand Application Studio\bin\models\Etc\ERHand\devices
Offsets and Directions
Note: These are the offsets and directions for your Allegro Hand
Last updated:
--Alex Alspach (talk) 14:50, 14 November 2013 (KST)
Finger | Joint | Encoder Offsets encoder_offset |
Encoder Directions encoder_direction |
Motor Directions motor_direction |
0 | 0 | -444 | + | + |
0 | 1 | -64772 | - | + |
0 | 2 | -582 | + | + |
0 | 3 | -1405 | + | + |
1 | 0 | -611 | + | + |
1 | 1 | -65329 | - | - |
1 | 2 | 335 | + | - |
1 | 3 | -1012 | + | + |
2 | 0 | 1247 | + | - |
2 | 1 | -65499 | - | + |
2 | 2 | -348 | + | + |
2 | 3 | -495 | + | + |
3 | 0 | -225 | + | + |
3 | 1 | 384 | + | + |
3 | 2 | -66607 | - | + |
3 | 3 | -64771 | - | + |
Template:SAH020CR018 Offsets and Directions (ROS)
NI USB-CAN
Copyright & Trademark Notice
Allegro, the Allegro logo, RoboticsLab, the RoboticsLab logo, and all related files and documentation are Copyright ⓒ 2008-2020 Wonik Robotics Co., Ltd. All rights reserved. RoboticsLab and Allegro are trademarks of Wonik Robotics. All other trademarks or registered trademarks mentioned are the properties of their respective owners.
Wonik Robotics's Allegro Hand is based on licensed technology developed by the Humanoid Robot Hand research group at the Korea Institute of Industrial Technology (KITECH).
Any references to the BHand Library or the Allegro Hand Motion and/or Grasping Library refer to a library of humanoid robotic hand grasping algorithms and motions developed and published by KITECH researchers.
J.-H. Bae, S.-W. Park, D. Kim, M.-H. Baeg, and S.-R. Oh, "A Grasp Strategy with the Geometric Centroid of a Groped Object Shape Derived from Contact Spots," Proc. of the 2012 IEEE Int. Conf. on Robotics and Automation (ICRA2012), pp. 3798-3804
Wiki maintained by Sean Yi <seanyi@wonikrobotics.com>
Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |